FAQ

Search

Prdoucts Catalogue

Online Chat

FAQ

1. CB Antenna
CB antenna is applicable on car telephone, the range of frequency can be collocated with the request of the area where the car telephone use.

Below is the products that we have designed to be referenced : 26.8-27.6MHz, 144-147MHz and 450-460MHz.

The material of the CB Antenna is the best quality copper, stainless steel.plastic,rubber. The antenna will collocate the base with strong magnetic , strong sticker or the stainless steel clamp.

Notice: the frequency of CB antenna must be exact, and the request of standing wave ratio must be little than 1.2 when you fix the antenna.

When tuning antenna,please connect an VSWR meter between transceiver and aerial. if the VSWR on channel 40 is higher than 1.5:1,please shorten or cut it by step of 5mm each until the VSWR value is closed to a value 1.5:1(please try to get same values both on channel 1 and channel 40)

2.The UHF/VHF antenna

The UHF/VHF Antenna be applicable on Cars, the frequency of VHF and UHF can be collocated from the area and the customers’ request. Frequency range : VHF174-230MHZ(6-12), UHF460-860MHZ(13-62).

Main material : copper, stainless steel,plastic,rubber.

Antenna install: strong magnetic base, bolt fix and steel clamps.

Notice: must be logical for the mounts selection, and pay attention to securing all screws and nuts and test the current during the final installation.

3.FM/AM antenna

The FM/AM Antenna be applicable to replace and maintain for Cars.

Antenna install: strong magnetic base, bolt fix ,steel clamp.

Notice: the install aperture and install angle must be match with the car.

The antenna connector should be match with the equipment, and must to test the current during the final installation.

4.Marine antenna

Marine antenna introduction:

Marine antennas be applicable for CB radios on ships, the frequency range can be collocated under the request of the area and the customers.

European Union amateurish frequency range: VHF 156-162MHz.

Main material : copper, stainless steel,plastic ,rubber.

Antenna install: strong magnetic base, bolt fix and steel clamps.

Notice: must be logical for the mounts selection, and pay attention to securing all screws and nuts and test the current during the final installation.

5.Electronical antenna

The ELECTRONICAL Antenna be applicable on Cars, the frequency and the function can be collocated from the area and the customers’ request. beautiful shape ,sensitive receive,strong concealment,simple install, can be combined with many functions.

The frequency: GPS，GSM ，CDMA，DVB-T，T-DMB ，AM/FM.

Main material : zinc alloy plating ,copper, plastic.

Antenna install: strong magnetic base, 3M sticker,bolt fix .

Notice: must be logical for the hole selection for the antennas ,and The output linker and the connector must be suited and please make the glass to be clean before you fix the antenna.

pay attention to test the current during the final installation.

6.Antenna accessories

The antenna accessories is suited to collocate appropriate length of the cable, the signal amplifier of the antenna ,the connector of the equipment, the nog of the antenna.

The wrong choice about the cable of the antenna, the connector, the signal amplifier will affect the receiving and radialization of the antenna.

The different connector of the cars wireless equipment, the different length of the cable will all affect the fixing of the antenna. We can customize with the different require of the clients.